Cuneiform Digital Library Journal
§1.2. The argument presented in this paper relies mainly on Old Babylonian school tablets because these sources bear deep traces of normalization processes, and they serve as examples that elucidate the principles of notations used in mathematical texts. In the Old Babylonian period, metrology and place value notation were taught in scribal schools in which this knowledge made up the first level of the mathematical curriculum. School tablets provide us with valuable evidence of the elements that the teachers considered essential. Thus, they constitute a good source for understanding the new concepts involved in numeration and metrology that emerged at the end of the 3rd millennium BC.
§1.3. From a methodological point of view, the paper will for the most part depend on the visual properties of the tablets, and will examine closely the way in which the texts are displayed. This kind of analysis potentially yields a classification of graphemes most similar to that of ancient scribes. In another respect, this paper is based on the general principles and functional classification of graphemes developed by CDLI collaborators. It contains, moreover, an attempt to import the descriptive system of graphemes used in the field of Mycenaean epigraphy.
§1.4. This paper will first present a detailed analysis of texts used in scribal schools to teach metrological notations (§§2-3) and place value notation (§4). Problems raised by the distinction between positional and non-positional numbers will then be examined (§5). The last section (§6) advances some practical suggestions for a greater standardization of the transliteration of mathematical texts.
§2. School Tablets
§2.2. After this first level came a more advanced program dedicated to calculation, namely, algorithms for the calculation of multiplications, reciprocals, surfaces, and probably also volumes. A rough idea of the proportion of tablets containing these different texts can be gathered from the following distribution:
§2.3. These data show that the first step of mathematical education focused on the notation of measures. The curriculum indicates quite clearly that metrology was not just an integral part of mathematics, but clearly an essential component, since metrological texts represented approximately half of all Nippur mathematical school texts. Where metrology constituted the first part of mathematical education, writing and using place value notation made up the second part. For the scribes, the memorization of an ordered set of elementary results (reciprocals, multiplications, etc.) was essential for the mastery of algorithms for calculation. School tablets are a coherent and strongly structured group of texts that focuses on notation of measures and calculation. Consequently, the extant corpus of such documents enables us to produce an exhaustive and methodical overview of metrological and numerical cuneiform notations, as well as an analysis of the broader systems into which these notations fit. It is precisely this ancient presentation made by the scribes themselves that I would like to re-examine in order to gain a better understanding of some basic principles applied by scribes in mathematical texts.
§3. Metrological Lists
§3.1.2. The first column of figure 1 (below) indicates how the lists appear on the tablets. Though it is somewhat artificial (in particular, I have noted only the beginning for each list), this presentation is a faithful reproduction of the visual properties of these lists. These properties are particularly well illustrated by the tablets HS 249+1805 (=TMH 8, no. 3) and HS 1703, reverse (=TMH 8, no. 8).
Figure 1: Extracts of metrological lists
§3.1.3. At first sight, three features attract our attention: the presence of double strokes, the clearly visible incipit, and the fact that signs are lined up in sub-columns on the tables. Let us have a closer look at these elements. Each list begins with an incipit and ends with a double stroke. The incipit gives, generally, the title of the list and the structure of the items.
§3.1.4. Thus all incipits include a generic qualifier with the exception of lengths. How can we explain the absence of such a qualifier in the final case? It should be recalled that each metrological list of capacities, weights, and surfaces corresponds to one metrological table (see §4), but for the list of lengths, we have in fact two corresponding tables: one for the horizontal dimensions, and the other for the vertical ones (see §§9.4-9.5). Strictly speaking, the incipit for the list of lengths should announce measures both for length and height. Whatever solution the scribes chose (whether they mentioned the two magnitudes or neither of them), this incipit necessarily included an irregularity. It should be noted, however, that the words for length, diagonal, height, and depth do sometimes appear in metrological tables. These words are mentioned at the end of the table, as can be seen in exemplars from Ur, where we find tables both for horizontal dimensions (uš, dagal) and vertical measurements (sukud, bur3); see for instance UET 7, 115 (Friberg 2000: 156).
§3.1.5. Through the display of graphemes on the tablet, we see clearly two sub-columns (that I designate as i and ii). These main sub-columns are occasionally further subdivided in some particular sequences in which the measures include the use of sub-units (for example, 1 uš 20 ninda / 1 uš 30 ninda / 1 uš 40 ninda / 1 uš 50 ninda). These short sequences, omitted in some sources, do not modify the general structure made up of two main sub-columns—the structure that is of interest to us. For example, the two main sub-columns are quite visible in Ist Ni 3913, reverse; Ist Ni 5196, obverse; Ist Ni 3352, obverse; HS 249+1805 obverse (TMH 8, no. 3); HS 247, reverse (TMH 8, no. 10).
§3.1.6. Let us analyze the content of the main sub-columns. The list below presents a selection of items that give an overview of the different measures listed. (I chose one item randomly for each unit of measure; for the complete list, see §8).
§3.1.7. A cursory analysis shows that the sub-column i includes graphemes designating integer and fractional values; the sub-column ii includes ideograms designating units of measure. A closer analysis will show that this simple structure seems locally altered (see §§3.4-3.5). The fact that the sub-columns correspond to different classes of graphemes suggests a vertical reading of the metrological lists. The information conveyed by this vertical reading is what I have termed a “system.” This term designates both the grapheme lists appearing in the different sub-columns and the ratios between the values represented by each sign. More precisely, according to our initial analysis given above, “numerical systems” are conveyed by the vertical reading of subcolumn i (see §3.2) and “units systems” are conveyed by the vertical reading of sub-column ii (see §3.3).
§3.2. Numerical Systems
§3.2.2. The most widely used system—and the simplest—is made up from signs “diš” (vertical wedges for which the numerical value is 1) and “u” (the “Winkelhaken,” for which the numerical value is 10); this “common system” is used for the majority of units of measure (capacities: gin2, sila3; weights: še, gin2, ma-na; surfaces: sar; lengths: šu-si, kuš3, ninda, UŠ, danna). The common system is an additive, decimal system and can be schematized by way of the diagram in figure 2.
Figure 2: common system
§3.2.3. In order to express integers ranging from 1 to 59, the scribe needs to write the signs “diš” and “u” as many times as necessary. This minimal repertory of signs is sufficient to express the complete range of useful measures, since units of a superior order are generally used for values beyond 59 lower units. The use of values above 60 is necessary for the largest units of each system; only then is it necessary to employ special numeration systems (see §§3.2.5-3.2.9). Note that in the case of the danna, which is the greatest length measure, values above 59 are rarely used. I am aware of only one attestation of such a value, found in a metrological list from Nippur (HS 249+1805 = TMH 8, no. 3, reverse v) which ends with the following sequence: 50 danna / 1(geš2) danna (see §5 for more details about the numerical system 1(geš2) belongs to). 1 danna represents a long distance— ca. 10 km—and the range from 1 to 59 danna, expressed in the common system, seems to have been generally sufficient.
§3.2.4. The system used to express measures in gur (the largest unit of capacity) and in gu2 (the largest unit of weight) in metrological lists is represented by the diagram in figure 3.
§3.2.5. The numeration called “system S” is already attested in Late Uruk texts. System S is based on a sexagesimal structure (hence its name) and an additive principle. System S as such appears in a literary text from Old Babylonian Nippur (CBS 11319+, figure 4; Sjöberg 1993). In this tablet, we find all the graphemes displayed in the part of sub-column ii of metrological lists concerning gur and gu2 units; but here the numerical graphemes are isolated from the context of their use, and brought together in a systematic list.
Figure 3: System S
Figure 4: CBS 11319+, first section
§3.2.6. System S is, to my knowledge, the only numeration that has been presented as a system in a non mathematical document. Numerical and metrological signs are widely attested in lexical lists (namely Ea and Hh as well as their precursors), but they are generally classified according to acrographic principles. This organization entails a dislocation of the original coherent system. The special treatment given to system S in CBS 11319+ perhaps indicates its particular importance in an Old Babylonian conceptional framework. However that may be, this tablet, as well as the fact that the same system is associated with both gur and gu2, indicates an autonomy of system S in relation to the unit systems and, more generally, implies an independence of system S in regard to the nature of the quantified items.
§3.2.7. The notation used to express measures with the greatest unit of surface area has the same formal structure as the other metrological notations: numerical graphemes in sub-column i and unit graphemes in subcolumn ii. The vertical reading of sub-column i leads to the diagram in figure 5.
Figure 5: System G
§3.2.9. Both systems S and G have very ancient roots, but we can note some Old Babylonian innovations, such as the introduction of sexagesimal multiples of the šar2 count unit (šargalgal and šargalgal šu nu-tag). These very large multiples are more theoretical than practical, since they rarely appear except in metrological lists and tables; in fact, as far as I know, the expression “šargalgal šu nu-tag” is not mentioned elsewhere. The addition, in metrological lists, of the same great sexagesimal multiples to system S and G brings out a parallelism between the two systems. It also stresses the sexagesimal structure of system S and, partially, of the system G. Another innovation is the functional reorganization of the graphemes in notations of measures of surface area (see §3.5).
§3.3. Units Systems
Figure 6: units systems
§3.3.2. The determination of ratios between units belonging to the same unit system results from the enumeration itself. This enumeration proceeds through a regularly increasing progression of the measurements (see for instance the sequence 1 šu-si / 2 šu-si / … / 9 šu-si / 1/3 kuš3, which shows clearly that 1/3 kuš3 = 10 šu-si, and thus, that 1 kuš3 = 30 šu-si).
§3.3.3. Metrological lists contain not only a graphical repertory, but also, through their organization in sections and sub-columns, a clear structure for the metrology, a classification of the graphemes, and a fixed definition of the ratios between the quantities indicated by the graphemes. They provide us with information about the notations and—more importantly—the systems behind these notations.
§3.3.4. The absolute values of the standard metrological units are well known (1 sila3 ≈ 1 liter; 1 gu2 ≈ 30kg; 1 sar ≈ 36m2; 1 ninda ≈ 6m), but the relationship between written metrological systems and practical uses of metrology can be more complex locally. Differences may result from both the geographical location and the historical period. To take only one example, metrology in school and mathematical tablets is highly normalized, unlike the metrologies found in administrative and business documents. This disparity reflects both the variety of local practices and the uniformity of teaching traditions. This issue, as well as the open question of the relationship between script and language, will not be dealt with in the limited framework of this paper.
§3.3.5. Another aspect will also not be treated here. Figure 6 does not include the list for units of volume. This is because the list of surface measures is in fact also a list of volume measures, both in standard units and in “brick” units. A set of coefficients allowed the scribes to use a unique list for different systems (Proust 2007, §6.6).
§3.3.6. Let us now use a “horizontal reading” in order to analyze the complete notation of measures and the resulting classification of the graphemes. From a formal point of view, each measure includes an initial component belonging to the sub-column i, and a second component belonging to the sub-column ii. I will designate these components as class (1) and class (2), respectively. The components of class (1) include integer and fractional numerical values; the components of class (2) include units of measure (the case of GAN2, ban2, and barig will be examined later). Graphically, numerical values and units of measure are designated by specialized signs, which have a precise function. It is therefore useful to assign names to classes of graphemes, using concepts developed in the field of Mycenaean studies around the time of the decipherment of the Linear B script (Greece, 1450-1200 BC): arithmograms are signs specialized for the designation of integer values; klasmatograms are signs specialized for the designation of fractional values; and metrograms are signs specialized for the designation of units of measurement.
§3.3.7. In the incipit of tablets, a third component, which is a substantive indicating the nature of the items quantified, appears. In some lists from sites other than Nippur, the third component is repeated for each item (e.g., Ashm 1931-137, from Kish, Robson, 2004: 31-34; see also a surface list in Nissen, Damerow and Englund 1993: 148, P235772). In these cases, three subcolumns i, ii and iii appear. In Ashm 1931-137, we can see for instance the following sequences:
Graphically, the components of class (3) are represented by the usual ideograms found in Sumerian texts: še (capacity), ku3-babbar (weight), and a-ša3 (surface). These ideograms have the same function as the signs called “ktematograms” or “substantive symbols” by Bennett in his study of the Linear B script (Bennett 1963: 115). Finally, the notation of a quantity includes:
These three components are almost always present when metrological quantities are written down in mathematical texts.
§3.3.8. Looking at the graphical repertory of metrological lists, we see that the same grapheme has different functions dependent on the sequence in which it is written. For instance, the sign 𒊺 (še) is used as a metrogram at the beginning of the list of weight units, but as a substantive grapheme in the list of capacities. Moreover, some metrograms represent different units of measure dependent on the system to which they belong. For instance, the sign 𒂆 (gin2) represents a unit of capacity (1/60 sila3, ca. 1/60 liter) or of weight (1/60 ma-na, ca. 8g). Some arithmograms also represent different values dependent on the metrogram with which they are associated. For instance, the sign 𒌋 (U) represents in general the value 10 (u), but, in association with the surface sign GAN2 it represents the value 18 (bur3). This phenomenon of polysemy is common in cuneiform writing. A sign does not have a meaning in itself, but only in reference to the system to which it belongs.
§3.3.9. Finally, for each component, the cuneiform notation of metrological quantities refers to three aspects that are in general closely linked: a dispositional aspect, a semantic aspect and a graphical aspect. The relation between the three aspects is quite stable in metrological lists and follows the pattern given in figure 7. This pattern is relevant for the majority of measure units (gin2, sila3, še, gur, ma-na, gu2, sar, šu-si, kuš3, ninda, UŠ, danna); it is not clearly the case for capacity measures expressed in ban2 and barig, nor, in a way, for surface measures expressed with the sign GAN2. These units of measure belong to old systems that were in use in Mesopotamia for a long time before they were integrated into the normalized system. I will now examine more closely these cases in §3.4 and §3.5, and evoke the historical roots of these discrepancies with the dominant pattern summarized in figure 7.
Figure 7: components of metrological quantities
§3.4. The Case of Capacity Measure in ban2 and barig
§3.4.2. In the Old Babylonian metrological lists, capacities expressed in ban2 and barig present analogous features, as described in figure 8. Each sign of this figure represents a measure of capacity. What is the nature of these signs? Are they arithmograms, klasmatograms, metrograms, or something else? From a formal point of view, since these signs are written in the sub-column i, they should be considered arithmograms or klasmatograms. One could, for instance, consider the sequence of figure 8 as fractions of gur. If the signs 𒑏, 𒑐, etc., were klasmatograms representing the fractions 1/30, 1/15, etc., of gur, we would expect the metrogram gur to appear in sub-column ii. In a certain way, it does for larger measures: the notation 𒀸 𒑰 𒄥 could be understood as 1 1/5 gur. However, the metrogram gur does not appear for lower measures. It would not be consistent to attribute different functions to the same grapheme, according to the relative importance (be it great or small) of the quantity, so the signs 𒑏 and 𒑐 cannot be considered klasmatograms.
Figure 8: measures in ban2 and barig
§3.4.3. In the same way, the sequence of figure 8 may be considered as representing multiples of sila3, and, in this case, the signs 𒑏, 𒑐, etc., would be arithmograms representing the values 10, 20, etc. According to this hypothesis, the metrogram sila3 should appear in the sub-column ii, which is not the case.
§3.4.4. Is the sign še present in the sub-column ii a metrogram? This sign is frequently used in administrative texts as a unit of capacity, and, in this case, its value is 1/180 gin2. As a metrogram, its place would thus be at the beginning of the list of capacities and not after the measures in sila3. The sign še is obviously not used here as a metrogram, but most probably as a substantive grapheme, and so has the same function as the one it assumes in the incipit.
§3.4.5. In fact, the signs presented in figure 8 are at once both arithmograms and metrograms. These integrated signs could be dubbed “arithmo-metrograms.” It is interesting to note that their layout in the metrological lists is nevertheless identical to that of other measures. In the sequence of ban2-barig, sub-column i contains the arithmo-metrograms, and sub-column ii, which is not of futher interest, contains the substantive grapheme še. So, the relationship between sub-columns and classes of graphemes does not conform to the dominant pattern resumed in figure 7 above, but instead follows another one:
§3.4.6. The presence of a substantive grapheme in subcolumn ii is an anomaly, but it gives a formal regularity to the whole document. Thus, the semi-archaic capacity system in ban2-barig with its integrated graphemes has been preserved. At the same time, from a formal point view, it has been assimilated to the normalized system of measures.
§3.5. The Case of Surface Measures Using the Sign GAN2
§3.5.2. In Late Uruk texts, the metrological system for surface areas is based on the system G, but the function of the graphemes seems to have evolved in the time between the archaic texts and the Old Babylonian period. Metrological tablets from the end of the 4th millennium (Nissen, Damerow and Englund 1993, 55-59, to MSVO 1, nos. 2- 3) contain a discrete set of numerical signs with specific surface area reference:
§3.5.3. In the rest of the corpus from the 3rd and 2nd millennia, the pronunciation, meaning, and function of the sign GAN2 are far from clear. In some third millennium texts, GAN2 can be interpreted as simple semantic indicator that was not supposed to be pronounced (Powell 1973). This is the reason why GAN2 is sometimes transcribed in superscript (for instance, for the Old Babylonian mathematical texts, see Neugebauer 1945; Robson 2004: 34; Høyrup 2002: 204). From a semantic point of view, GAN2 and a-ša3 seem to have been in competition in the third millennium, which led M. Powell to suggest the value “ašax” (in current sign lists aša5) for GAN2 in particular contexts (Powell 1973); this reading of GAN2 has been accepted by Friberg (2000: 140). The pronunciation of GAN2 in the Old Babylonian period in metrological contexts is unknown. These observations shed light on reasons why so many different transliterations of GAN2 can be found today in editions of mathematical texts.
§3.5.4. What is the nature of graphemes in the system G (ubu, iku, etc.) and of the sign GAN2 in Old Babylonian metrological lists? In these lists, the substantive grapheme for surfaces is a-ša3, since this is the word indicated in the incipit (or in a third sub-column, as we have seen in the Kish text and in P235772). The sign GAN2 is therefore not a substantive grapheme. This sign is systematically written in sub-column ii, as is the smaller surface area unit (sar). Formally, the sign GAN2 assumes the function of a measure unit equivalent to 100 sar (see the sequence 2(u) sar / 3(u) sar / 4(u) sar / 1(ubu) GAN2). Note that the competition between a-ša3 and GAN2 pointed out by Powell is here resolved by the attribution of a precise function to each grapheme: the sign GAN2 as metrogram and the sign a-ša3 as substantive grapheme. The graphemes of the system G are situated in sub-column i and formally have the function of arithmograms. The system G is thus presented in the Old Babylonian lists as a numerical system, just like system S. Consequently, the Late Uruk surface area system with its integrated graphemes has been reorganized in order to be assimilated into the normalized writing of measures made up from two components.
§3.5.5. These remarks about the evolution of the systems of capacity and surface area measures demonstrate two distinct modalities of integration of ancient systems. The solution chosen by the scribes to make new things out of old ones seems to have been pragmatic: in the case of capacities, which are of very common use in Babylonian administrative and business practices, old habits have been preserved; in the case of surface area measures, however, it seems that notations have been rationalized, at least at a graphical level (we don’t know what the linguistic counterpart for a notation such as 1(iku) GAN2 is).
§3.5.6. To summarize, metrological lists indicate that the conception of the notation of quantities changed with the systematization of dissociation into three components (numerical value, unit of measure, nature of the quantified items), each with its graphical counterparts (arithmograms and klasmatograms, metrograms, and substantive graphemes). This conception is clearly shown by the layout of metrological lists (with sub-columns and incipit), for which the visual effect is particularly striking on the tablet HS 1703. We can observe how the formal rigidity of metrological lists reflects the coherence of the whole system, and how it hides irregularities. These results are reviewed in figure 9.
Figure 9: Overview of metrological notations
§4. Calculation Tools: Metrological and Numerical Tables
§4.2. Concerning the place value notation, which is treated in a number of publications, I will limit my discussion to a few crucial characteristics. First, positional numbers are written without any indication of their order of magnitude (that is, 1, 60 and 602 are written in the same way). Second, positional numbers are not associated with a unit of measure or any quantified item (such as magnitude, commodity, or collection). Lastly, from a graphical point of view, each of the 59 sexagesimal digits is written according to the “common system” presented above, i.e., with “diš” (1) and “u” (10) repeated as many times as necessary.
§4.3. Graphical variations, which sometimes distinguish the “common system” from the positional system, can be discerned. The notation of numbers in the positional system is strongly normalized: vertical wedges and Winkelhakens are arranged in groups of three elements at most. Some exceptions can be found in the earliest of the Old Babylonian mathematical texts (Isin-Larsa period), but they are scarce. However, the notation is much more diverse in administrative texts, in which different arrangements of the wedges and Winkelhakens for the digits 4, 7, 8, 9, 40 and 50 are frequent (Oelsner 2001).
§4.4. I discussed the issue of the nature of the correspondence between measures and positional numbers in (Proust 2008c), where I argued that the nature of this correspondence can be understood only through a study of the entirety of the school curriculum documentation, from elementary to advanced levels. This documentation shows that each numeration plays a specific role. The numerations developed in metrological lists, all of which are additive, are used for quantifying (measures, and, as we will see, discrete counting). In the school tablets, positional numeration is used exclusively for arithmetic operations belonging to the field of multiplication: multiplication, inversion, power, square and cube roots. Metrological tables enabled the scribes to switch from measures to positional numbers and vice versa. These frequent transformations are the basis of methods for calculating surface areas and volumes. The calculation of the surface area of a square in the text Ist Ni 18 is a good illustration of this mechanism: two distinct zones of the tablet contain, respectively, the positional numbers and the corresponding measures.
§4.5. The operations made with positional numbers refer to algorithms, some of which (including methods of factorization for the calculation of reciprocals, square or cube roots) have left traces in the texts, whereas others (such as the algorithm for multiplication) have left few, if any, traces. These traces as well as the lacunae indicate that the calculation was based on a perfect knowledge, probably completely memorized, of numerical tables. We know of these tables thanks to school tablets; at Nippur they were studied just after metrological lists and tables. Numerical tables are composed of the following sections: a reciprocal table (Ist Ni 10239), 38 multiplication tables (Ist Ni 2733), a squares table, a square roots table (Ist Ni 2739) and a cube roots table, all written in sexagesimal place value notation. Once these tables had been memorized, the young scribes were introduced to calculation by means of a small repertory of exercises bearing on multiplication (Ist Ni 10246), the calculation of reciprocals (Ist Ni 10241), the determination of surface areas (Ist Ni 18), and probably also of volumes.
§4.6. After this short overview of the contents of mathematical school tablets from Nippur, I would like to emphasize two important consequences for transliteration. Additive numerations were used by scribes specifically for measuring and counting, and place value notation was used for computing. So we have to distinguish in the clearest way the additive numerations from the positional ones, as did the ancient teachers. Moreover, the positional numeration was a powerful tool primarily for calculation, and this ability should be reflected in modern notations.
§4.7. Thus, it is crucial to determine, when faced with a number noted on a tablet, whether it belongs to a positional numeration or not. Generally, this identification is easy: in a non-positional number, the different orders of magnitude of the digits are indicated by the shape of the signs (e.g., 1(šar’u) 8(šar2), quoted in figure 10) or by a special word (e.g., 5(diš) šu-ši 6(diš), also quoted in figure 10); in a positional number, the different orders of magnitude of the digits are not noted (as in 1.8, or 44.26.40). However, in some cases, the identification is not so simple. I will try, in the following, to analyze some of these ambiguous situations in order to determine why confusion often arises.
Figure 10: Number of years in the SKL on W-B 1923-444
§5. How Can We Distinguish Additive and Positional Notations?
Figure 11: System used in SKL
§5.1.2. In current transliterations of SKL, the numbers are converted into our decimal system, which prevents the reader from restoring the ancient notations (see, e.g., ETCSL 2.1.1). I have made an inventory of cuneiform notations included in the SKL according to the copy made by Langdon from the Larsa prism W-B 1923-444 (Langdon 1923, plts. I-IV). A representative sample of these notations, classified in increasing order, is given in figure 10 (the line numbers are those from ETCSL). It must be pointed out, however, that the exact same cuneiform notations are found in other sources, thereby validating the following commentaries for all Old Babylonian versions of the SKL. This small extract is enough to identify the numerical system to which the graphemes belong.
§5.1.3. The values 1 and 60 are represented by the same sign, a vertical wedge, with the same size. However, the scribes avoided possible confusions by including the name of the sixties (šu-ši) in ambiguous cases, as can be observed for example in lines 79 and 183. Values above 600 are represented by the same signs as the ones used in metrology before gur and gu2 (see figure 13 below). Thus, we can conclude that, in spite of the impression given by notations in lines 271 and 77, the sexagesimal numeration used in SKL is additive and not positional.
§5.2. Cardinal Numbers in Colophons
Figure 12: Number of lines and sections
§5.2.2. As in the case of the number of years, the units and the sixties are noted by means of the same sign. In ambiguous cases, the name of the sixties (šu-ši) is explicitly stated (examples 3 and 4). This principle is followed, to my knowledge, in all mathematical tablets. Thus, the system used to count lines and sections in the colophons is the same as the system used to count years in the SKL, i.e., a variant of system S. Though it looks positional, the number in example 1 of figure 12 belongs to an additive system (note the shape of the digit 4 in example 1, which illustrates the graphical variations mentioned in §4.3).
§5.2.3. The risk of confusion between the additive and positional systems occasionally arises for some numbers below 600 but never for numbers above or equal to 600, as shown by figure 13.
§5.3. Mathematical Texts
§5.3.2. As a matter of fact, some graphical anomalies do occur. I will quote here a few examples related to the notation of measures in ninda.
Usually, these notations are transliterated 3.45 ninda and 1.20 ninda, as if the notation were positional (see§6.5). However, if we consider the whole text, we find the following notations:
§5.3.3. If the notations were positional, the klasmatogram 𒈦 (1/2) would not appear and the numerical notations would be as follows, respectively:
pa5-sig5 5(diš) UŠ uš 2(diš) kuš3 dagal 1(diš) kuš3 bur3-bi 1/3 gin2 eš2-kar3
§5.3.4. Note the presence in this example of the three components in the notation of length: the arithmogram 5, the metrogram UŠ, and the substantive grapheme uš. For the transliteration of line 1 of YBC 4612, we could restore the unit UŠ in the same way:
3(diš) <UŠ> 4(u) 5(diš) nindaOr simply indicate that the first digit represents sixties:
3(geš2) 4(u) 5(diš) ninda
§5.3.5. To sum up, notation of the number of ninda may appear positional in some parts of a text, but this is an illusion, since the positional character disappears in other parts of the same text (in ambiguous cases or when fractions are used). As in the case of counting, the confusion disappears if we consider the system to which the signs belong.
Figure 13: Comparison of sexagesimal numerations
§6. Some Suggestions for Transliteration
§126.96.36.199. The conventions developed for the CDLI were defined principally by Damerow, Englund and Tinney at the first CDLI technical meeting in Kinsey Hall (now Humanities Building), UCLA, in March 2001. The initial documentation provided guidance on the transliteration of graphemes and is included in the current ATF documentation, with few changes (Tinney 2009a). This was supplemented by a reference document consisting of a set of tables giving Ur III metrological systems and examples (Englund and Tinney n.d.). A subsequent white paper elaborated a classification of graphemes (count-grapheme, unit-grapheme, integral-value grapheme) and laid the foundations for an analytical framework to support computational processing of Mesopotamian metrology (Tinney 2004). Implementation of this processing is now under way (Tinney 2009b).
§188.8.131.52. The substance of the present paper was prepared in advance of a CDLI technical meeting held in Berlin in May 2008. Following that meeting, a preliminary version of the documentation of the CDLI ‘mathematical’ conventions was prepared that incorporated several of the points in the present paper, and was discussed via e-mail by the author, Peter Damerow, Bob Englund, Eleanor Robson and Steve Tinney, resulting in further refinements. The latest version of this document is available as part of the ATF documentation (Tinney 2009c).
§184.108.40.206. The results of these discussions allows the transliteration of metrological notations found in mathematical texts. However, some problems remain concerning place value notation. The digitization of mathematical texts is only just beginning, and conventions for place value notation in databases are still being debated.
§6.1.2. The following suggestions rely mostly on the principles elaborated by the CDLI, but I wish to add one more: it must be possible for a reader, provided only with the transliteration of a cuneiform numerical notation, to determine if this notation is positional or not. In other words, cuneiform positional notation should be transliterated by modern positional notation, and cuneiform non-positional notation should be transliterated by modern non-positional notation.
§6.2. Transliteration of the Measures of Length in ninda
§6.3. Transliteration of Measures of Surface Area Using the Sign GAN2
§6.4. Transliteration of the Measures of Capacity ban2 and barig
Quantities expressed in gur and its subdivisions (nigida and ban2) are not transliterated as integers and fractions but as a set of three numbers: thus 1 gur is 1.0.0, 1 nigida is 0.1.0, 1 ban2 is 0.0.1. When sila3 are mentioned, a fourth number is added followed by the word sila3. This, with a slight variation in the punctuation, is also the system adopted by Kraus in recent publications.
§6.4.2. This notation system is very convenient and widely used. However, “positional’ transliteration is a source of confusion because it gives the reader the impression that the ancient system is positional, which is not the case. Moreover, it implies an anachronistic use of zeroes. The application of the CDLI conventions solves all these difficulties (see the composite text of the capacity measures list in §8.1).
§6.5. Transliteration of Cardinal Numbers
§6.6. Transliteration of Positional Numbers
§6.6.2. To illustrate point (1), we should consider the metrological tables. Since the numbers noted in the left and right columns belong to different systems and are additive and positional respectively, it is important that this difference in systems appears clearly in the transliteration. The following example shows how an item of the weights table should be transliterated:
In contrast, transliteration such as:
or such as:
would obscure the fundamental distinction that scribes made themselves between the numerical systems displayed in the left and right columns of the metrological tables.
§6.6.3. To illustrate the point (2), it is sufficient to imagine what would become of a multiplication table if the CDLI encoding system for numerical notations were used without any further overlay annotation:
4(u) 4(diš) 2(u) 6(diš) 4(u) a-ra2 1(diš) 4(u) 4(diš) 2(u) 6(diš) 4(u)This raw notation is unworkable for calculation. More importantly, the sign 𒁹 transliterated 1(diš) belongs to an additive numeration (e.g., in the common system). In additive numerations, each sign represents an absolute value, and the value of the whole number is the sum of the values of the signs that compose it. Thus the notation 1(diš) in transliterations indicates not only the grapheme 𒁹, but also the value 1. In place value notation, generally the sign 𒁹 does not represent the value 1, so we cannot translate it as 1(diš).
§6.6.4. Another point should be raised. Neugebauer and Thureau-Dangin were in the habit of separating sexagesimal digits by means of dots or commas. This punctuation also indicates the numerical strings, and the modern reader of the transliteration easily perceives the beginning and the end of the number. For example, the number
§6.6.5. The first problem is legibility. Let us take for example the end of the multiplication table quoted above. The lack of identification of the numerical strings makes the reading difficult, even with the insertion of small spaces between digits and larger spaces between numbers, as follows:
44 26 40 44 26 40 33 55 18 31 6 40The use of punctuation makes the reading noticeably easier:
44.26.40 44.26.40 220.127.116.11.6.40In texts containing numerical algorithms, such punctuation is absolutely necessary to the understanding of the calculation (see for example the tablets CBS 1215 and UET 6/2, 222). It is for the same reason that Sumerologists indicate in the transliterations verbal and nominal strings by means of dashes or dots. These marks do not exist in Sumerian cuneiform texts or in mathematical ones.
§6.6.6. The second problem is that a blank space in the transliteration is a “sign,” as much as a punctuation mark is. In other words, introduction of spaces in the transliteration (for example small spaces separating digits and large spaces separating numbers) is not more faithful to the cuneiform text than the introduction of punctuation marks. It can even be argued that this encoding by blank spaces interferes with rules used in cuneiform texts to manage space. For example, a space between cuneiform signs can have mathematical significance in relation to the performance of an algorithm. This signification can be distinct from that of separator of numerical strings (see Ist Ni 10241, reverse). Conversely, spaces between signs can be deprived of mathematical significance and simply be used to fill a complete line (the notation of the same numbers in Ist Ni 10241 obverse is “justified” in a typographic sense).
§6.6.7. A third problem is linked with the more general issue of representation of spatial elements. In mathematical texts, the layout is not reduced to a simple disposition of the data in columns. The layout adheres to rules that are sometimes complex, and it takes on a crucial importance in cases such as numerical texts in which meaning is conveyed partially by the two-dimensional disposition of the information (see Proust forthcoming). Diagrams (geometrical figures or cadastral maps) containing cuneiform notations raise another type of encoding problem, which needs further examination. These remarks draw attention to the fact that the representation of spaces organized by the scribes on the clay surface, either as linear lines of writing or two-dimensional layouts in the case of algorithms and diagrams, is a problem as such. This problem has not been treated and will, of course, not be solved in this paper, but the question of how spatial representations should be encoded is worth a specific and detailed examination.
§6.6.8. Neugebauer also insisted that the floating character of the notation of positional numbers must absolutely be preserved in the transliteration. For him, transliterations of positional sexagesimal numbers should not bear marks such as zeros or commas that specify the order of magnitude of the number, since such marks do not exist in cuneiform texts (Neugebauer 1932-1933: 221).
§6.6.9. The use of Neugebauer’s or Thureau-Dangin’s notations for the transliteration of positional numbers in internationally accessed databases will thus find a large consensus among current specialists. Difficulties may nevertheless arise for numerical texts that we do not yet know how to interpret. In these cases, neither numerical strings nor sexagesimal digits can be identified. A neutral representation of the sequences of tens and units may be the best solution in such case. This is exactly what the “conform transliteration” system, elaborated by Friberg (1993: 386), attempts to do: units are represented by digits ranging from 1 to 9, and tens by numbers followed by the degree symbol “°” (1° represents a Winkelhaken, i.e. 10, 2° represents 2 Winkelhakens, i.e. , 20, etc.).
§6.6.10. For example, the tablet HS 231 (TMH 8, no. 72) is not clear, so the distinction of digits and numbers is not certain. The text could be transliterated as follows:
1. 3 2°
§6.7.2. One should apply to the arithmograms the principles of transliteration usually applied to other cuneiform signs. A standard publication transliteration distinguishes, on the one hand, the phonetic notations of Akkadian (represented by lowercase italics) and the ideographic notations of Sumerian (represented in various unitalicised ways by specialists), while simultaneously identifying the nominal and verbal strings by means of dashes or dots. These differences in font and punctuation do not belong to the cuneiform text, but their presence in the transliteration results from an initial reading by the scholar, who renders the text intelligible to others using these visual aids. The same process for mathematical texts, i.e., distinguishing additive numerations from positional ones and indicating the numerical strings, results from a reading process that comprehends the ancient significations and attempts to make them accessible to the user of transliterations.
§7.2. I have based my arguments mainly on sources from Nippur. Nevertheless, it must be recalled that school tablets from other Babylonian cities show no major differences when compared to the Nippur material. The same metrological lists and tables have been found in Mari, Susa, Assur, Ugarit, etc. This wide diffusion of metrological lists and tables indicates that, in the Old Babylonian period and later, schools and other teaching places were the main vector of standardization.
§7.3. Nonetheless, “school tablets” do not mean “school texts.” Metrological texts were written on very different types of tablets according to the place, the time, or the milieu: we often find brief extracts on round tablets, as in the schools of Mari or Ur, but sometimes whole series appear on great prisms or tablets. For example, the prism AO 8865, perhaps from Larsa, is probably not an exercise performed by a young pupil, but rather the work of an experienced scribe. Metrological lists and tables fulfil not only a pedagogical function, but also a normative one. They are the “white papers” of the scribes.
§8. Metrological lists (composite text based on sources from Nippur)
§8.2. Weights (ku3-babbar)
§8.3. Surfaces (a-ša3)
§8.4.Lengths (uš, sag, dagal)
§9. Metrological tables (composite text based on sources from Nippur)
§9.2. Weights (ku3-babbar)
§9.4. Lengths (uš, sag, dagal)
§9.5. Heights, depths (sukud, bur3)
Version: 22 June 2009